101="INF-Tool - the *special* Setup Creation Tool"
110="Why should I send HUGE and resource-intensive installation files to my customers, if Windoze provides an installation feature itself among it's bells && whistles?", I asked myself on a cold and rainy day in October 1997..."
111="After weeks of investigation about the "not so well" documented format of those mysterious .INF installation script files, I finally found out how to do it."
112="And here is the result!"
113="INF-Tool now has possibly become one of the most powerful installation programs available! By using INF-Tool, you can choose from 4 methods of distributing your program."
114="Overhead for Installation software routines: ONLY A FEW KB's, but NOT MORE!"
115="So: forget all those huge installation tools you had to know up to now. Use INF-Tool, if you just have some files to deliver! Or use it, if you want to save download time or disk-space!"
116="Yours, Richard Fellner [r.fellner@bigfoot.com]"
; 116="And if you would be honourable enough to support MY work with a few $'s, I'd also be a happy, young guy... Yours, Richard Fellner [r.fellner@bigfoot.com]"
117="show Intro Screen next time"
{ INF file explorer }
151="INF File Explorer"
160="&File"
161="&Exit"
162="&About"
163="&change current directory"
170="F&iles"
171="[ %s &Sections ]:"
172="click a line for details ..."
173="double-click a line to edit ..."
174="\n*.I&NF Files\n*.INI files"
175="sa&ve line"
176="&Current directory:"
177="&warn before writing changes"
178="%s Keys"
179="%s line editor"
180="Couldn't find %s !"
181="&delete line.."
182="&add line.."
183="&cancel.."
184="Error accessing file for full display."
185="Remember that saving changes could permanently affect your Windows configuration. It will also remove unnecessary blank lines (except section separators).\n\nDo you want to write changes to disk ?"
186="Directory %s not found !"
187="Error writing %s !"
188="No line selected."
189="Delete line \n%s ?"
190="Select a directory to load from:"
191="Original"
5174="select the preferred file type to work with"
5175="save this line"
5176="switch to another directory containing INF/INI files"
5177="check to receive a warning message before saving any changes"
5192="select another INF/INI file from the current directory"
5193="click on a section name to display its contents"
{ Dependency Checker }
201=".DLL Dependency Checker"
202="&OK"
203="&Cancel"
205="This file requires that the listed DLL files can be found on the\ntarget computer. Marking a file will add it to your setup project -\nhowever, avoid to bloat your package by adding files everyone\nhas on his computer due to a typical Windows installation...!\nNote that unchecking a file will *not* remove it from your file list\nfor safety reasons."
5202="save these settings"
5203="cancel changes"
{ INI file properties }
351="Modify INI file(s):"
352="&OK"
353="&Cancel"
360="INI file root directory:"
362="subdirectory:"
364="INI file name:"
366="(INI directory must already exist)"
368="Add"
369="Delete"
370="Change"
371="additions:"
372="deletions:"
373="changes:"
374="to section"
375="from section"
376="in section"
377="&add to list"
378="(reg'd only)"
379="example: AppPath=C:\\data"
380="Click right mouse button to define changes."
385="example: AppPath"
5352="save these settings"
5353="cancel changes"
5361="Select the root of the directory where the INI file should be modified"
5363="Enter the subdirectory name of above directory where the INI file should be modified"
5365="enter the INI file name"
5367="enter your desired modifications here. Just click on the desired action and right-click with the mouse to define changes."
5380="enter an assigment to add. Example: "TempDir=C:\\data" will add this string to the selected section."
5381="enter a replacement for the left assignment. Example: "TempDir2=C:\\data2" will replace the left occurence with this one."
5382="enter the section in which to apply your definition"
5383="enter a value to delete. Example: "TempDir" will delete this value from the selected section."
5384="enter the assignment that should be replaced with the right one."
415="create self-extracting, single file distribution ZIP archive (.EXE)"
416="Dialog caption of self-extractor:"
417="Text file containing licence information:"
418="Text file containing 'About' text:"
419="(missing files are marked red.)"
420="Icon for your package:"
421="Run Notepad.."
422="Select "About" text for your setup:"
423="Choose licence information for this distribution:"
424="Select name of distribution package:"
425="self-extracting archives (*.EXE)|*.EXE"
426="ZIP archives (*.ZIP)|*.ZIP"
427="Cabinet archives (*.CAB)|*.CAB"
438="Don't close status window until installation process has finished."
439="no "Install" and "Finish" prompts"
440="(only allowed with fixed\ndestination directories)"
441="make unrecognizable for other unpackers"
442="split file / disk-spanning"
443="Bytes per volume:"
445="hide "Info" button"
5402="Save these settings"
5403="Cancel changes"
5411="select the compression technique to use for this package"
5413="Just select your preferred language module which should be used for the self-extracting installer."
5414="check this option to use password encryption for this package"
5415="check this option to let INF-Tool create a self-extracting, single-EXE package"
5421="run Notepad to create a new file or edit an existing file"
5428="enter a filename for this package (without extension!)"
5429="enter the password you'd like to use for encryption"
5430="enter a short text line to display on the caption bar of the self-extractor"
5431="the name of the plain Text file containing licence information for your program"
5432="the name of the plain Text file containing the "About" text that will show up in the Self-extractor's main window"
5433="the name of the Icon that will be used for the Setup program (leave empty to use default)"
5434="click to select a name for your package (or simply enter the desired name)"
5435="click to open a text file containing licence information for your program"
5436="click to open a text file containing the "About" text which will show up in the main window when using self-extracting distribution."
5437="click to open an icon file that will be used for the Setup program"
5438="if checked, the installation dialog will not close before Win9x/NT tells that all installation-related processes are completed"
5439="The self-extractor will execute prompt-less, without dialogs (as long as no errors occur)"
5442="check this option to split the package if it exceeds the defined size. Suggested if you want to offer safer downloading of if you have to distribute on floppy disks."
5444="select a pre-defined size for each part or enter another size in bytes."
5445="prevents INF-Tool copyright info and your name from being displayed by the self-extractor (it will still be stored in the EXE file, but hidden from the end-user)"
{ Registry additions }
451="Add the following key to the Registry:"
452="&Add"
453="&Cancel"
460="..at &Root-Key:"
461="Example: Software\\MegaSoft\\WorldMap"
462="Example: DefaultUser"
463="Example: Miller or 00,00,00,00,FF,01"
464="Note: Fields marked with a * are required for proper operation."
465="Values can only be saved after all required fields have been entered!"
466="Subkey: *"
467="Value Name:"
468="Flag:"
469="Value:"
471="User Dir. as in Step #3"
472="delete this registry key during installation"
473="delete this registry key during uninstallation"
5452="save these settings"
5453="cancel changes"
5460="select the Registry-Root in which your key should be added/changed"
5467="enter the name of the value you'd like to add or change"
5468="select one of 11 pre-defined flags (for Key types) that can be used in Registry entries (check the help file for more information)"
5469="Enter the (Default) value for your registry key (check the help file for more information). The format of this value depends on the flag (=type of key) you selected above."
5470="enter the subkey of the above selected Registry root key"
5472="if checked, the installation will delete this key during installation, if it exists (instead of installing it)"
5473="if checked, the installation will delete this key during uninstallation (default)"
{ Add Start Menu Group }
501="Add the following file to a Group:"
502="&Add"
503="&Cancel"
510="Group name:"
511="Icon/Link Title: *"
512="Starting command: *"
513="Starting directory:"
514="Subdirectory of the selected root where the application should start from:"
515="The command must start with the filename,\nparameters are optional. Case-sensitive!"
516="Example: MegaSoft or MegaSoft\\WorldMap (same as in Step #3)"
517="Note: Fields marked with a * are required for proper operation."
518="Not all required fields were entered!"
519="A link to this program will be directly placed to the\n"Programs" folder of the Startup group."
525="Use shortcut icon:"
527="create link in the personal section of Start menu"
528="add link in the "All Users" section of Start menu (NT)"
529="add this link for new users (NT)"
530="create link in personal section of the Start menu only"
5502="save these definitions"
5503="cancel changes"
5520="enter a name for the group to create (or select an already defined group from the list)"
5521="select which title to display for this program"
5522="select the name (and optional parameters) of the file that should be started"
5523="Select the starting directory for this command. The defined command will be executed in this directory when the user runs the application."
5524="this is the subdirectory of the root selected from above, from where the program will be executed"
5526="select the icon for the selected shortcut (will only work for "real" programs, not URLs or such)"
{ OCX Registration }
551=" Register OCX/DLL files"
552="&OK"
553="&Cancel"
561="Simply check the files you want to be registered."
562="(reg'd only)"
5552="save these settings"
5553="cancel changes"
5560="the checked files will be registered on the customer's PC during installation"
{ Flags for file copy }
601="Copy %s using the following modes:"
602="&OK"
603="&Cancel"
610="Warn if skipping"
611="No skipping after errors"
612="No version-check"
613="Force "file in use" behaviour"
614="No overwrite"
615="No version dialog"
616="Replace only"
617="When un-installing:"
618="include in File Un-install list"
619="Force "file in use" behaviour"
620="(reg'd only)"
621="copy files using the following modes:"
5602="save these settings"
5603="cancel changes"
5610="display a warning if the user tries to skip a file after an error has occurred"
5611="don't allow the user to skip copying the file after an error has occurred"
5612="ignore file versions and write over existing files in the destination directory"
5613="handle the file as if it was in use during the file copy operation (Windows will create a temporary filename, which will be renamed to the desired filename after a restart)"
5614="don't overwrite an existing file in the destination directory"
5615="don't overwrite a file in the destination directory if the existing file is newer than the source file, but don't show a warning dialog"
5616="copy the source file to the destination directory only if the file is already present in the destination directory"
5618="if you uncheck this option, this file will stay on the computer when the program is un-installed"
5619="if the file is in use when un-installing, queue the file to be deleted when the system is rebooted"
{ Add Destination directory }
651="Add the following destination directory:"
652="&Add"
653="&Cancel"
654="&Save"
660="Select the &root of the directory to create:"
661="Enter the &directory name to create under the selected root:"
662="Example: MegaSoft\\WorldMap"
663="(Caution: Win95/98 doesn't support Long File Names here)"
664="Each directory has to start with a pre-defined (logical) root directory.\nIn the 2nd edit field, you can define an individual directory starting\nfrom the selected root directory, in which to copy your files to."
667="Pre-configured destination path:"
668="User-defined destination path:"
669="Default:"
671="Sub-Directory:"
673="Prompt user with:"
675="Where would you like to install %s?"
676="Continuing will overwrite the existing version of %s on your computer. Please enter the desired directory."
677="Overwrite warning:"
5652="save your definitions"
5653="cancel changes"
5665="Select one of the pre-defined roots for your file (e.g., the boot directory). Afterwards, you can define a subdirectory for this root (e.g., "Program files")."
5666="if needed, enter a subdirectory of the root directory you defined above"
5667="check if you want the selected files to be copied to a fixed, pre-defined path"
5668="check if you want to allow the user to select a custom path for the selected files"
5670="here you can select a default root for the user-defined destination directory"
5672="here you can select a default subdirectory of the above root for the user-defined destination directory"
5674="enter a prompt to ask your user for the desired destination."
5678="enter a message that will warn your user about overwriting an existing version of this application"
{ Modify AUTOEXEC.BAT }
701="Modify the AUTOEXEC.BAT file:"
702="&OK"
703="&Cancel"
704="(registered version offers all options)"
710="Add to the path:"
711="Remove from path:"
712="Add command #1:"
713="Parameter(s):"
714="Add command #2:"
715="Delete command(s):"
716="(don't add an extension if you want to remove all lines with this command.) Example: KEYB"
717="Set Environment var:"
718="Remove Env.Variable:"
719="Set TEMP directory:"
720="Subdirectory of the directory above:"
5702="save these settings"
5703="cancel changes"
5721="Select the directory to add to the PATH= statement in Autoexec.bat. In the next field you can enter a subdirectory of it (e.g., if you need "<Boot-Dir>\MMyFiles")."
5722="Enter the subdirectory of the above directory to add to the PATH= statement in Autoexec.bat. Both will be combined. If the resulting path is not part of the PATH= line, it will be added."
5723="Select the directory to remove from the PATH= statement in Autoexec.bat. In the next field you can enter a subdirectory of it (e.g., if you need "<Boot-Dir>\MMyFiles")."
5724="Enter the subdirectory of the above directory to remove from the PATH= statement in Autoexec.bat. Both will be combined. If the result is part of the PATH= line, this part will be removed."
5725="select (or enter) the name of the file or command that should be started (e.g., "SET" or "MSCDEX.EXE")"
5726="enter parameters for the command defined at the left (e.g., "Language=eng" or "/D:MSCD000")"
5727="Every command defined here will be deleted from Autoexec.Bat. If you don't enter a extension, any command line with this file will be removed (e.g., KEYB.EXE and KEYB.COM)."
5728="enter the name of the environment variable to add to Autoexec.Bat (e.g., "UserDir")"
5729="enter the value to set for the Environment variable defined at the left (e.g., "c:\uusers\rrichey")"
5730="enter the name of the environment variable to remove from Autoexec.bat"
5731="Select the directory to define as TEMP directory in Autoexec.bat. In the next field you can enter a subdirectory of it (e.g., if you need "<Boot-Dir>\TTEMP")."
5732="Enter the subdirectory of above directory to set as TEMP directory in Autoexec.bat. Both will be combined."
{ Modify CONFIG.SYS }
750="Modify the CONFIG.SYS file:"
752="&OK"
753="&Cancel"
754="(registered version offers all options)"
760="Set FILES= to:"
761="Set BUFFERS= to:"
762=""
763="Set STACKS= to:"
764="Set FCBS= to:"
765="Add device driver #1:"
766="Add device driver #2:"
767="Parameters:"
768="Delete device driver:"
769="Delete key(s):"
770="Just enter the modifications you'd like to apply to CONFIG.SYS.\nNote that this feature will only work under Windows 95/98."
5752="save these settings"
5753="cancel changes"
5771="enter the number of FILES to set in Config.sys"
5772="enter the number of BUFFERS to set in Config.sys"
5773="enter the char of LASTDRIVE to set in Config.sys"
5774="enter the value(s) for STACKS to set in Config.sys"
5775="enter the value(s) for FCBS to set in Config.sys"
5776="enter the code(s) for the COUNTRY= statement in Config.sys"
5777="enter the value for the DOS= statement in Config.sys (e.g., "HIGH,UMB,NOAUTO")"
5778="enter the value for the SHELL= statement in Config.sys"
5779="select the name of the Device driver of your package to add to Config.sys (e.g., MULTICD.SYS)"
5780="select the parameter(s) for the Device driver defined at the left (e.g., "/Multi=1 /IRQ=15")"
5781="enter the name(s) of the device drivers to remove from Config.sys (e.g., "Display.sys")"
5782="select the name of the Config.sys statements to delete"
{ AutoRun.INF settings }
801="CDROM AutoRun.INF creator"
802="C&reate"
803="&Cancel"
805="Program to execute:"
806="(if not located at the root directory, include path on CDROM)\nExample: Install\\MySetup.exe"
807="Icon for this program:"
808="(optional.) Example: Install\\MyIcon.ico"
809="This utility will create a Windows-compatible AutoRun.INF file for CDROMs. Just enter the above data, click the "Create" button and let the resulting AutoRun.INF file be copied to the root directory of your CDROM.\nThe desired program will automatically execute when the CD is inserted and the Notification flag is enabled."
5802="create the AutoRun.INF file with your settings"
5803="no creation of the AutoRun.INF file"
5810="enter the program name to be started when the user inserts the CDROM. May also contain a relative path to the root directory of the CD, but no drive letter (since the CDROM drive letter of your user is unknown yet)."
5811="Optionally, enter the name of an icon which should be displayed as drive icon in the Windows explorer (may also be the above EXE file if it contains an icon)."
{ Run before/after options }
851="Actions before and after Setup"
852="&OK"
853="&Cancel"
854="(Options saved in reg'd version only)"
860="before Setup ..."
861="after Setup ..."
862="before Uninstall ..."
863="after Uninstall ..."
865="Launch command:"
866="Parameters:"
867="quiet"
868="Display status message:"
869="\nNo action\nReboot PC\nRestart Windows"
5852="save these settings"
5853="cancel without saving"
5867="run in the background"
5870="enter or select a command or program to run"
5871="if required, enter parameters for the defined command or program"
5872="if you like you can enter a status message to display while executing the defined command"
{ Main window }
1001=" INF-Tool - your speedy INF Setup Program Generator"
1002="&OK"
1003="&Close"
1004="&Help"
1005="&Test"
1010="Step 1: Project information"
1011="Name of &installation script"
1012="open.."
1013=", save as"
1014="(8.3 convention!)"
1015="Name of your application: *"
1016="Version:"
1017="Short description:"
1018="Your name:"
1019="Copyright:"
1020="Open an existing installation script:"
1021=".INF installation scripts|*.inf"
1027=""Software" Registry key: *"
1029="*) required!
6002="Save all your settings and create the .INF script!"
6003="close without saving"
6004="click for additional help"
6005="click to test your installation script (reg'd version only)"
6006="previous step"
6007="next step"
6020="select a previously saved setup project"
6012="open an existing installation script (must be created by INF-Tool)"
6021="enter the name to use when saving this INF file (without extension)"
6022="enter the name of the application for which you are building the installation script"
6023="enter the version number"
6024="give a short description of your program - it will be added as comment to the script"
6025="enter your name - it will be added to the script as comment"
6026="enter your copyright text here"
6028="enter the key name for your application to use in the SOFTWARE path of the registry (e.g., "Magic Software Inc.\WWorldMap")"
; Limit erreicht ! 6040+6041 in der nΣchsten Section
1030="Step 2: Files to install"
1031="Add"
1032="Remove"
1033="Properties"
1034="sort list"
1035="Add all the files you need for this setup. If you like, drag them from the Explorer.\nMissing files are marked red!"
6036="this list contains all the files used during the installation process"
6031="add a file to the list (or drag && drop from Explorer)"
6032="remove a file from the list"
6033="control how the file will be copied"
6034="sort this list alphabetically"
; continued from step #1:
6040="easily explore and change the structure and contents of .INF and .INI files on your computer"
6041="easily create AutoRun.INF files which will automagically run your desired programs when the user inserts a CDROM created by you."
6042..6044 free
6045="change base directory for missing files (marked red)"
1060="Step 3: Destination(s)"
1061="Files to assign:"
1062=""
1063="Destination directory (directories)"
1064="Add"
1065="Remove"
1066="Edit"
1067="Simply drag the desired file(s) to the destination directory of your choice.\n(If you don't change anything, all files will be copied to the Windows directory)"
6064="add a target directory for a group of files"
6065="remove the highlighted entry"
6066="edit the highlighted directory definition"
6068="select files with the mouse and drag them to the directory where they have to be installed"
6069="just drag files from the left list over the directory where they have to be installed"
6062="sort this list"
6070="let the selected file(s) of the left list be copied to the selected directory of the right list"
6071="let all files of the left list be copied to the selected directory of the right list"
6072="remove the selected file(s) from the directory they are assigned to"
6073="remove all file(s) from the currently selected directory"
1090="Step 4: modify Registry"
1091="Add"
1092="Remove"
1093="Edit"
1094="(reg'd only)"
1095="The keys defined above will be added to the Windows Registry."
1097="Import"
6091="add an entry to the registry"
6092="remove the selected entry from the list"
6093="edit this registry entry"
6096="this list contains all the additions to the Windows registry taking place during the installation"
6097="Import settings from an existing .REG file"
1120="Step 5: Shortcuts"
1121="Add"
1122="Remove"
1123="Edit"
1124="The Groups defined above will be created for your application."
1125="(reg'd only)"
6121="add a group definition"
6122="delete the selected group definition from the list"
6123="edit the currently selected group definition"
6126="this list contains the definitions for all groups (Start Menu, Desktop, etc.) this script will create"
1150="Step 6: Modify System"
1151="Modify Autoexec.Bat ..."
1152="Modify Config.Sys ..."
1153="Register OCX's ..."
1154="Modify .INI file(s) ..."
1155="will be supported soon"
1157="please select an entry first!"
1158="Sorry: currently not more than 5 INI files are supported."
1159=" add,"
1160=" delete,"
1161=" change"
1162=" in "
1165="Modify:"
6151="With your INF script, you can modify the AUTOEXEC.BAT file on the target PC. Click here to define your changes."
6152="With your INF script, you can modify the CONFIG.SYS file on the target PC. Click here to define your changes."
6153="With your INF script, you can "register" OCX or DLL files on the target PC. Click here to select a file for registration."
6154="With your INF script, you can modify INI files on the target PC. Click here to define such modifications."
6156="click the button to the left to apply changes"
6163="click to add an INI file definition"
6164="click to delete the highlighted INI file definition"
1180="Step 7: Dialogs"
1181="Icon for the Windows Software Setup Dialog\n(when installing from there):"
1183="Prompt user before un-installing:"
1184="Status message after un-installing:"
1185="!!!!!!NOT DISPLAYED ANYMORE!!!!!" "(Un-install dialogs will require the AdvPack files)"
1186="* (reg'd only)"
1187="offer Un-install of this program"
1190="Are you sure you want to remove %s?"
1191="%s was successfully removed from your computer."
1192="%s has been successfully installed."
1193="After installation, prompt user with:"
1195="Before installation, prompt user with:"
1197="add "Uninstall" Shortcut to Start menu"
6182="select an Icon that will symbolize the type of your software when installing from the Software applet of the Windows Control Panel"
6187="if checked, the script will enable this program to be un-installed by selecting it in the Windows Control Panel 'Add/Remove Programs' dialog"
6188="enter a message to warn users if they want to remove your program"
6189="enter a message that will pop up after a successful un-installation of your program"
6194="enter a message requesting the user to confirm that he/she wants to install your program (leave this field empty to prevent this message)"
6196="enter a message that will pop up after a successful installation of your program (leave this field empty to prevent this message)"
6197="if checked, INF-Tool will add a shortcut to the Start menu for uninstalling your program."
1210="Step 8: Distribute"
1211=" create a "distribution disk" directory: "
1214="Populate directory NOW!"
1215=" create a distribution package: "
1216="Name:"
1217="Options.."
1218="Generate package NOW!"
1219="Execute command(s) after the installation:"
1220="define actions .."
1222="<click to edit..>"
6214="creates a directory and populates it with all the files you need for building your installation diskette"
6217="set special options like SFX packages, name of your package and more..."
6218="starts generating the distribution package"
6221="please enter the name of the directory INF-Tool should create for storing the required files"
1240="Options"
1241="create .&BAK files *"
1242="display information and warnings"
1243="Win'98 style buttons"
1244="display Intro Screen *"
1245="open .INF's with INF-Tool"
1246="repair INF functionality"
1247="I have trouble adding files (e.g., PIF files)"
1248="Default flag for file copy operations:"
1249="Options for this project only:"
1250=" After setup... \nNo action\nReboot PC\nRestart Windows"
1251="add AdvPack files to package (if required)"
1252="Sa&ve INF-Tool's configuration"
1253="Preferred language:"
1254="Configuration saved.\nSome changes might require a new start of INF-Tool to show up."
1255="Please restart INF-Tool to apply the language change.\nIf you encounter display problems, please check the help file."
1257="always clean up distribution directory"
1258="add MS's registry-repair code to project"
1259="require Administrator rights for install"
1260="disable popup hints"
1261="check for new version"
6241="create .BAK files for safety"
6242="display a message when a new .INF script was created"
6243="if you like Win98's "bells and whistles", then check this option ;-)"
6244="show the INF-Tool information screen at startup"
6245="open .INF files by INF-Tool when double-clicking (edit will only be possible when the script was designed by INF-Tool)"
6246="if your .INF scripts can't be installed by right-clicking your mouse and selecting "Install", try to check this option and click "Save configuration""
6247="Some users had trouble when trying to add MS-DOS mode .PIF files or others to the file list in Step #2. By checking this option, you can work around this problem."
6250="Which action should Win9x/NT take after processing the installation script?"
6251="if checked, the script will add AdvPack.dll, W95Inf16.dll and W95Inf32.dll to your distribution package if you defined Un-install dialogs"
6252="save INF-Tool's settings now"
6255="(see Tips && Tricks help file for more information)"
6256="select your preferred language, click "Save" and restart INF-Tool to apply display changes"
6257="if checked, INF-Tool will delete all files from your distribution directory before rebuilding it"
6258="if checked, INF-Tool will add a few switches which will repair commonly-damaged parts of the registry"
6259="this will add code to check if the user has permissions to install programs"
6260="don't show popup hints"
6261="if an Internet-connection is active, INF-Tool will check if a newer version is available"
1270="About.."
1271="I have put several thousands of hours in developing this tool."
1272="Please honor my efforts to provide you, the programming community, with this program if you use it!"
1273="The registration fee is just $35. You can register online by clicking on the Internet-Link beyond:"
1274="Register online (secure)"
1275="or see the help file for more information about other methods of registering."
1276="Get the latest release and the newest information directly at our web site:"
1277="or send me an e-mail to"
1278="Thanks for registering"
6271="Please don't give this registered version to other persons. I kept the price low, so registering should be cheap enough for EVERYONE."
;666274="Are you online? This button can take you directly to the Ordering Network registration site (which is a VERISIGN (r) authentic site and supports maximum browser security)."
{ 5000..7000 : Hint texts }
{ are calculated: ID+5000 }
{ IMPORTANT NOTE: Hint texts are CUT after more than 1 space (blank) !}
{ 10000..10200 : Program messages }
10000=""
10001="%s not found, using defaults."
10002="Sorry, the unregistered version only supports 1 destination directory!"
10003="ERROR: %s code=%s"
10004="Sorry to disturb you at your work -\nbut if you use INFTool, please be fair and register.\n\nINFTool should help you to save more money than the $35 for registration.\nRead the help file for information about the enhancements of the registered version!"
10005="No installation script could be generated.\nStep 2: No files defined."
10006="Error creating %s!"
10007="%s must be found to create a valid Long File Name conversion!"
10008="You shouldn''t use trivial names like SETUP.INF or INSTALL.INF for\nyour scripts since they might cause conflicts with other programs."
10009="%s has been created."
10010="Files are missing."
10011="Welcome to INF-Tool!\nWith INF-Tool you will be able to design\nvery smart "Single-EXE" packages or\nfull-featured installation scripts\nwith just a few KB's of required\ninstallation "software" :\nfrom very easy to very complex ones.\n\nTo give you a feeling about how it works,\nthe easy setup script DEMO.INF will be loaded now."
10012="This version is only registered for 1 Licence,\nnot allowed to be started from a network drive."
10013="Sorry, but Shareware version is limited to 5 files and 1 group.\n\nThe registered version of INF-Tool offers unlimited files and unlimited groups !"
10014="Would you like to save your settings?"
10015="Sorry, but the use of Long File Names is only supported\nby the registered version of INF-Tool!\n\n(please use only short file names for testing purposes)"
10016="You shouldn't add the INF script manually -\nINF-Tool will do this automatically for you!\n\nIt's suggested that you remove the INF script from the list."
10017="Sorry, but for this feature you need the\nSetup Script Starter Utility SETUP.EXE,\nwhich you will receive as a registered user.\n\nMeanwhile, please test your script by right-clicking it\nwith the mouse and choosing "Install.." from the context-menu."
10018="Windows NT only supports "reboot", INF-Tool will reflect that in the INF script."
10019="Error #%d opening %s!"
10020="One or more file(s) couldn't be opened!\nPlease check your distribution options and if any other setup programs are running in the background."
10021="INF-Tool successfully built your distribution package!\nCompressed %8.0n to %8.0n Bytes (= %n %%)."
10022="Please select a group first!"
10023="%s not found!"
10024="One or more files for this project couldn't be found.\nThese files are marked RED in the file list of Step #2.\nPlease note that a working script can only be created\nif INF-Tool can locate and copy these files."
10025="Error building package."
10026="Please define the name of the Storage directory first."
10027="%d file(s) copied to %s.\n\nThese files can be distributed and installed:\n1) via the SETUP utility\n2) via the "Software" applet of Windows' Control Panel\n3) by right-clicking the INF file with the mouse and selecting "Install..".\n\nYou can also use this directory for testing or other purposes."
;10028=""
10029="Please let INF-Tool generate a Distribution disk directory first!"
10030="Error executing %s!"
10031="Please check the help file for more information."
10032="<Name of your program>"
10033="%s is locked or could not be opened -\nINF-Tool had to assign an incorrect Filesize for this file."
10034="Your installation options require the AdvPack files,\nbut your package will not contain them.\nTo be safe, you could check the option "Add AdvPack Files"\n(see Help files for more information)."
10035="Using Installation prompts with self-extracting packages (which offer all prompts by themselves) can result in installation problems if the user waits too long answering these dialogs."
10036="You need a newer version of AdvPack.DLL!"
10037="There might be problems registering files with long file names."
10038="Using long file names containing spaces can cause problems when using parameters. In this case, please carefully test the functionality of your setup before distribution."
10039="If you want to use commas in your prompt, please enclose them between quotes to prevent display problems."
10040="Hard-coded destination directories like you just entered it are not supported by Windows 95/98.\nPlease select one of the pre-configured root directories from the list and enter a subdirectory of your choice as destination for your files."
10041="The registered version also offers creation of shortcuts in System areas like the Desktop, the "Programs" menu, the "SendTo" menu, the "Autostart" menu and others!"
10042="Your defined prompts are too long and had to be truncated by a total of %d chars."
10043="Sorry, this feature is only supported by the registered version of INF-Tool."
10044="This is not a valid AutoRun definition.\nThe program should not contain a drive letter, since it will be run from a CDROM, for which you can't know the drive letter yet."
10045="You should only enter executables (.EXE) for safety reasons."
10046="Import a registry file"
10047=".REG registry files|*.reg"
10048="This is not a valid registry (.REG) file.\nRegistry files can easily be created by entering Regedit.exe, clicking a section of your registry and selecting "Registry"-"Export registry file" from the menu."
10049="Step #3: %s has no matching entry in the left list !\nPlease carefully check for different spellings of this filename since this could cause setup problems !"
10050="You have mixed up language settings. Sorry, but you have to completely redefine these settings or reactivate the previous language setting for this project."
10051="Start Menu"
10052="Programs"
10053="Program files"
10054="Uninstall %s"
10055="Sorry, but %s was not created by INF-Tool.\n\nOpening and reading standard INF script files is scheduled for an upcoming version of INF-Tool."
10056="Please select a valid language for the self-extractor."
10057="Each volume size must be at least 65kb (65535 Bytes) - size will be adjusted."
10058="Splitting was not required for this package."
10059="Could not create %s - new icon couldn't be applied."
10060="Sorry, but this INF script can't be analyzed successfully..\nIf you are a registered user, please send it to me as described in the helpfile -\nI'll see what I can do. ;-)"
10061="This INF file is missing basic sections and/or header signatures required for Software installations and can't be analyzed successfully."
10062="Potential problem: could not find %s section."
10063="Step #1: please enter an INF filename for this project first."
10064="Missing file(s) - alternate icon can't be applied.\nPlease check your project configuration."
10065="Couldn't retrieve Icon ID's of self-extracting module: please reinstall INF-Tool."
10066="Error applying alternate icon. Please check your project configuration."
10067="Desktop"
10068="Commands before Setup are just supported\nwhen using user-defined destination directories!"
10069="Commands before Uninstallation are just supported\nwhen using user-defined destination directories!"
10070="In this version, "quiet" calls are applied to both of the defined commands!"
10073="Sorting the list will reset all defined file copy flags to the default value.\n\nDo you like to proceed?"
10074="Re-ordering this list may produce incorrect results at your Shortcut definitions.\nIf you change the default order, don't forget to test your installation carefully before deployment."
10075="Unchecking this option will clear all related prompts. Are you sure?"
